SELL DEFOAMER REFINED PARAFFIN PREMIUM PD 6000 PAPER INDUSTRY, AGENT MOSTLY, BOTH ACID/ROMANIA

defoam PD 6000 is a refined paraffin wax based premium quality defoamer which used in paper industry.
  Properties
  Appearance: Smooth Paste
  Color: White
  Ionity: Nonionic
  Solubility: Milky white Emulsion
  Alkalinity: 2.3 to 3.1 % as KOH
  Acid Value: 12 to 20 mg as KOH per gram
  Packing: 170 Kg Net in MS Open Mouth Drums with LDPE Liner inside
  
  Application & Recommendation:
  defoam PD 6000 is used as defoaming agent mostly in premium quality papers and is suitable in treating both cylinder and fourdrinier machine systems. It is suitable in both acid and alkaline pulp mills.
  It is recommended to use 2.5 % solution. The solution should be prepared by adding about 25 % water first under mixing and warming to 60°C. After proper dissolution final concentration is obtained by addition of water.
  defoam PD 6000 is very good dispersible in water when the procedure as mentioned is used. This avoids any quality problem on the paper and also will not tend to fill up the felts.
  The most economic and effective point of addition is right ahead of the spot where foam is generated and troublesome. Dosage: Dosage will vary with individual mill condition but normally 1 to 1.5 Kg. of defoam PD 6000 is required per ton of pulp to knock down the foam in the system and to improve flow and sheet formation.